15 16 18 21 Series CNC DNC Prolfic PL2303 USB RS232 Serial to DB25 Male Cable Software Flow Control CNC-SW-25M(1m)

USB-to-VGA Adapters15 16 18 21 Series CNC DNC Prolfic PL2303 USB RS232 Serial to DB25 Male Cable Software Flow Control CNC-SW-25MMaterial: PVC outer jacketCable: 26AWG*3C, OD4.0Color: BlackCable Length: 1.0M, 1.8M, 3.0M in stock, other length can be Connector A: USB 2.0 type A maleConnector B: DB25 maleChipset: Prolific PL2303GTApplication: for 15 16 18 21 Series CNC DNCABOUT PL2303GTThe PL2303GT chip is one of the latest G-Series IC product added to the popular PL2303 USB to Serial(UART) Bridge Controller family, replacing the PL2303RA USB to RS232 serial chip. It provides an advancedfull-featured single-chip bridge solution for connecting a full-duplex UART asynchronous serial interfacedevice to any Universal Serial Bus (USB) capable host. The PL2303GT provides highly compatible USBdrivers to simulate the traditional COM port (via virtual COM Port) on most operating systems allowingexisting serial UART applications based on legacy COM port to easily migrate and be made USB ready.PL2303GT integrates a high baud rate RS-232 transceiver that meets the EIA/TIA-232F and CCITT V.28communications interface specifications. The RS-232 transceiver is a 3-transmitters and 5-receivers devicewith a high-efficient charge pump circuit embedded. This high-efficient charge pump circuit with 1uF externalcapacitors provides the bipolar output to the transmitters, and makes the transmitters to deliver the RS-232output voltage levels. Under normal operation, PL2303GT operates at very low power consumption withguaranteed data rate up to 1000kbps. PL2303GT also has an active-low shutdown indicating pin that canserve as a shutdown indicator for special application purposes.The PL2303GT is pin-to-pin compatible with the PL2303RA chip. It also integrates an RS-232transceiver, an internal precise clock generator (no external crystal required), USB 1.1 transceiver, SerialInterface Engine (SIE), LDO voltage regulator, power-on- reset (POR), FIFO data buffers, and OTPROM.The PL2303GT added several features and enhancements:Integrated termination resistors and pull-up resistor to reduce PCB external components. USB drivers for different OS platforms with faster performance and advanced features.Precise baud rate generator (up to 1Mbps).OTPROM can be programmed directly through USB (no high voltage generator required).Larger TX/RX FIFO data buffers (1024-byte).Supports 3.3V VBUS voltage operation.Unique USB Serial Number for each IC.4 GPIO pins (all input mode at power-up) with easy to use SDK. Can also be configured as TX/RX access LEDs, and I2C EEPROM (EE_SCL, EE_SDA) interface in OTPROM.The PL2303GT is designed to support a wide-range of serial RS232 application including mobile,embedded, industrial, consumer, healthcare, navigation, and wearable solutions in mind. It provides asmall footprint that could easily fit in to any connectors and handheld devices. With very small powerconsumption in either operating or suspend mode, the PL2303GT is perfect for bus powered operationwith plenty of power left for the attached devices.Royalty-Free Driver SupportWindows 10, 8, 7, Vista, XP, (Microsoft Certified WHQL Drivers)- Windows Update Driver installation available in Windows 7 and above (32/64-bit) Windows Server 2003, 2008, 2008 R2, 2012, 2016, 2019Windows Embedded Industry, Point-of-Service (WEPOS), and POSReadyWindows Embedded Compact, Windows Embedded , Windows OS XLinux OS 3.18 and above (Support Linux 5.5 in-box driver and above)Android 3.2 and above==========Package : YesModel Number : CNC-SW-25MType : Serial CableOrigin : Mainland Certification : ,ULColor : BlackCable Length : 1.0M 1.8M 3.0MConnector A : USB 2.0 Type A MaleConnector B : DB25 maleChipset : Prolific PL2303GTApplication : for CNC DNC

• USB-to-VGA Adapters
• 15 16 18 21 Series CNC DNC Prolfic PL2303 USB RS232 Serial to DB25 Male Cable Software Flow Control CNC-SW-25M